A set of stickers made on high-quality holographic film. The stickers do not differ in quality from classic stickers, they are resistant to weather conditions and UV rays and perfectly adapt to the shape of plastics after preheating. Note: The colour of the stickers, due to the characteristics of the film and light intensity, may slightly differ from the original plastics. CREATE your own set of stickers in your favourite colours.
Step 1 - Choose a name and a number
Step 2 - Choose your decoration colour (colour 1)
IMPORTANT: The tank sticker must be perforated. Otherwise there is a high risk of wrinkling due to petrol fumes. Perforation must be done BEFORE sticking. The kit contains stickers for the following parts:
Radiator covers / Tank / Front wing / Rear wing / Fork guard / Air box / Control arm / Number fields.
On some older motorbike models, the decals for the swingarm and fork guards are not available. The stickers are of the highest standard. They are digitally printed and laminated with a very strong and transparent material that protects against wear and tear. The stickers have a strong, acrylic-based adhesive that holds firmly while ensuring that no marks are left behind when peeling off. Applying the stickers:
Thoroughly clean the plastics with our pre-decal-cleaner or brake-cleaner. This applies even to new plastics which have oil residues on the surface after manufacture. Stickers should be applied at room temperature.
Ensure that the sticker is accurately centred on the lid before you start gluing it on. When you are happy with the fit of the sticker, peel off the protective film in one corner of the sticker and start slowly pressing the sticker on. It's also a good idea to have a small cloth/sponge with you, which glides easily over the sticker.
Carefully, lightly press in even lines to avoid air bubbles. For heavily curved lids, it is a good idea to heat the stickers with a hairdryer first.
After applying the stickers, leave the plastics at room temperature for 24 hours. PLEASE NOTE: This product is NOT returnable as it is made to order and personalised.
This product is not subject to cancellation, exchange or refund.
Step 1 - Choose a name and a number
Step 2 - Choose your decoration colour (colour 1)
IMPORTANT: The tank sticker must be perforated. Otherwise there is a high risk of wrinkling due to petrol fumes. Perforation must be done BEFORE sticking. The kit contains stickers for the following parts:
Radiator covers / Tank / Front wing / Rear wing / Fork guard / Air box / Control arm / Number fields.
On some older motorbike models, the decals for the swingarm and fork guards are not available. The stickers are of the highest standard. They are digitally printed and laminated with a very strong and transparent material that protects against wear and tear. The stickers have a strong, acrylic-based adhesive that holds firmly while ensuring that no marks are left behind when peeling off. Applying the stickers:
Thoroughly clean the plastics with our pre-decal-cleaner or brake-cleaner. This applies even to new plastics which have oil residues on the surface after manufacture. Stickers should be applied at room temperature.
Ensure that the sticker is accurately centred on the lid before you start gluing it on. When you are happy with the fit of the sticker, peel off the protective film in one corner of the sticker and start slowly pressing the sticker on. It's also a good idea to have a small cloth/sponge with you, which glides easily over the sticker.
Carefully, lightly press in even lines to avoid air bubbles. For heavily curved lids, it is a good idea to heat the stickers with a hairdryer first.
After applying the stickers, leave the plastics at room temperature for 24 hours. PLEASE NOTE: This product is NOT returnable as it is made to order and personalised.
This product is not subject to cancellation, exchange or refund.