ProTaper EVO magnesium is a super light handlebar that weighs only 640g. Nevertheless, it is up to 45% stronger than equivalent handlebars because of a special aluminium alloy. ProTaper EVO also has very good flexibility. It reduces vibration and shock which ultimately relieves the arms. EVO can simply take a lot of force without losing its original shape.
Fits all bikes with a 28.6mm handlebar mount. If you currently have a 22,2mm handlebar you need a conversion adapter. Bar pad sold separately.
In the selection menu, you can choose the model and the measurements of the handlebars.
The measurements indicate:
H = Explains the height of the handlebar. One tip is to always measure the handlebars with a ruler from the end of the handlebar and the lower handlebar mounting. Then you get a clear picture of how far your new handlebars will be. The height indicated by (B) of the example image.
B = Explains the bend of the handlebar and is always from the guide bracket to the end of the handlebar (see example image) bend is indicated by (E) of the image.
All dimensions are counted in mm. Need more info about the dimensions those are further down in the text.
Features:
- 4mm thick wall.
- 7000 series aluminium.
- epoxy powder coated inside against corrosion.
- Ribbed left side that holds the handle in place.
- Chemically treated center lines that prevent abrasion.
A = Width.
B = Height.
C = Raise.
D = space for the handlebar risers.
E = Sweep / inward tilt.
Suitable for all motorcycles with 28.6 mm handlebar mounts. If you have a 22 mm handlebar then you will need a 22 mm to 28.6 mm converter. sold separately.
Search below for the right dimensions needed for each handlebars
HIGH Magnesium:
A=800 B=84 C=56 D=202 E=52
Factory Stock:
A=800 B=92 C=62 D=217 E=47
Woods HIGH:
A=800 B=97 C=69 D=211 E=61
Pastrana LOW:
A=800 B=74 C=56 D=203 E=55
High:
A=800 B=95 C=71 D=204 E=60
Windham Mid:
A=800 B=99 C=74 D=219 E=53
Carmichael:
A=800 B=77 C=40 D=195 E=55
Henry/Reed:
A=800 B=92 C=66 D=206 E=57
Fits all bikes with a 28.6mm handlebar mount. If you currently have a 22,2mm handlebar you need a conversion adapter. Bar pad sold separately.
In the selection menu, you can choose the model and the measurements of the handlebars.
The measurements indicate:
H = Explains the height of the handlebar. One tip is to always measure the handlebars with a ruler from the end of the handlebar and the lower handlebar mounting. Then you get a clear picture of how far your new handlebars will be. The height indicated by (B) of the example image.
B = Explains the bend of the handlebar and is always from the guide bracket to the end of the handlebar (see example image) bend is indicated by (E) of the image.
All dimensions are counted in mm. Need more info about the dimensions those are further down in the text.
Features:
- 4mm thick wall.
- 7000 series aluminium.
- epoxy powder coated inside against corrosion.
- Ribbed left side that holds the handle in place.
- Chemically treated center lines that prevent abrasion.
A = Width.
B = Height.
C = Raise.
D = space for the handlebar risers.
E = Sweep / inward tilt.
Suitable for all motorcycles with 28.6 mm handlebar mounts. If you have a 22 mm handlebar then you will need a 22 mm to 28.6 mm converter. sold separately.
Search below for the right dimensions needed for each handlebars
HIGH Magnesium:
A=800 B=84 C=56 D=202 E=52
Factory Stock:
A=800 B=92 C=62 D=217 E=47
Woods HIGH:
A=800 B=97 C=69 D=211 E=61
Pastrana LOW:
A=800 B=74 C=56 D=203 E=55
High:
A=800 B=95 C=71 D=204 E=60
Windham Mid:
A=800 B=99 C=74 D=219 E=53
Carmichael:
A=800 B=77 C=40 D=195 E=55
Henry/Reed:
A=800 B=92 C=66 D=206 E=57