Description
Tools to test the ignition when you suspect that there is a problem.
Measuring range: 0-40,000 Volts
Use:
- Connect the spark plug to the ignition tester
- Ground the clamp
- Set the adjusting screw to approximately 10mm
- Make sure the ignition tester does not come close to the ground
- The engine can now be started
IMPORTANT:
- If your engine has several cylinders, the remaining parts of the ignition system must be grounded (otherwise, parts of the ignition system may be damaged)
- If you have removed the spark plugs, a petrol mixture may come from the cylinder
- Only use the ignition switch
Measuring range: 0-40,000 Volts
Use:
- Connect the spark plug to the ignition tester
- Ground the clamp
- Set the adjusting screw to approximately 10mm
- Make sure the ignition tester does not come close to the ground
- The engine can now be started
IMPORTANT:
- If your engine has several cylinders, the remaining parts of the ignition system must be grounded (otherwise, parts of the ignition system may be damaged)
- If you have removed the spark plugs, a petrol mixture may come from the cylinder
- Only use the ignition switch
Specifications
- Weight Packaging 96
- Length Packaging 170
- Height Packaging 35
- Width Packaging 90
Customer reviews (4)
4.5 out of 5
Based on 4 reviews
- 52
- 42
- 30
- 20
- 10